Seat Memory - Audi A5 Owner's Manual

document_0900452a8179700c.book Seite 74 Donnerstag, 22. März 2007 10:19 10
74 Seats and storage
When the front seats are moved forward, their original positions are
stored in a memory. The seats then stop automatically in this posi-
tion when they are moved back. If you want to move one of the seats
A
back further, release the switch
The head restraints on the front seats retract automatically
(depending on the seat height setting) when the backrests are
tipped forward, and move back to their original positions when the
backrests are returned to the upright position.
Note
The easy-entry switches on the relevant seat are out of action when
the driver's or passenger's doors are closed.

Seat memory

Applies to vehicles: with seat memory
Memory for driver's seat
You can use the recall buttons in the driver's door to store
and recall the seat adjustments for two drivers.
As well as the driver's seat position, the seat memory will store and
recall the exterior mirror settings (if the vehicle is equipped accord-
ingly):
Storing and recalling settings
You can store and recall the settings for two different drivers using
the recall buttons 1 and 2 ⇒ fig. 76 ⇒ page 74.
and press it again.
B
In addition, the current settings are automatically stored when you
lock the vehicle and assigned to the remote control key that is being
used. When you unlock the vehicle, the system automatically recalls
the settings stored on that remote control key.
Switching seat memory on and off
The seat memory will be out of action if the
raised position (press and release). The word OFF will then light up
in the
The stored settings will all remain in the memory. We recommend
using the
vehicle is being driven temporarily by a different driver whose
settings do not need to be stored in the system.
Applies to vehicles: with seat memory
Storing and recalling settings
The
in) before you can store and recall the desired settings.
Storing settings
– Adjust the driver's seat as required.
– Adjust both exterior mirrors.
– Press and hold the
Fig. 76 Driver's door:
Seat memory
– Then release the buttons. The settings are now stored on
ON/OFF
switch.
ON/OFF
ON/OFF switch to deactivate the seat memory when the
ON/OFF switch must be in its down position (pressed
SET button. At the same time press
one of the recall buttons for at least a second.
the selected recall button.
switch is in the