Audi A5 Owner's Manual page 282

document_0900452a8179700c.book Seite 280 Donnerstag, 22. März 2007 10:19 10
280 Fuses and bulbs
Applies to vehicles: with halogen main beam headlights
Installing the bulb for the main beam
headlights
When installing a bulb, the lug on the base of the bulb
must be inserted into the appropriate mounting on the
bulb housing.
– Attach the new bulb to the connector ⇒
bulbs" on page 276.
– Insert the bulb carefully into the bulb housing. Start by
placing the base of the bulb directly behind one of the
retaining hooks so that the lug fits into the recess on the
bulb housing.
– Press the connector in the direction of the arrow
⇒ fig. 263 until the bulb engages.
– Check that the bulb is securely seated in the bulb
housing.
– Fit the rubber cap and install the headlight ⇒ page 278.
– Check whether the new bulb is working.
– Have the headlight settings checked.
Note
Ensure that the rubber cap is seated correctly so that no water can
enter the unit.
Fig. 262 Bulb with
connector: The lug on
the base of the bulb is
Applies to vehicles: with halogen dipped headlights
highlighted
Removing bulb for dipped headlights
Fig. 263 Fitting bulb
for main beam head-
lights
in "Changing
Fig. 264 Headlight
unit: Cover