Installing The Memory; Dual Channel Memory Configuration - Gigabyte GA-A55-DS3P User Manual

Motherboard
Hide thumbs Also See for GA-A55-DS3P:
Table of Contents

Advertisement

1-4

Installing the Memory

Read the following guidelines before you begin to install the memory:
Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one direc-
tion. If you are unable to insert the memory, switch the direction.

1-4-1 Dual Channel Memory Configuration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the
memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. En-
abling Dual Channel memory mode will double the original memory bandwidth.
The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as
following:
Channel 0: DDR3_2, DDR3_4
Channel 1: DDR3_1, DDR3_3
Due to APU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1.
Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.
2.
When enabling Dual Channel mode with two or four memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used and installed in the same colored
DDR3 sockets for optimum performance. For optimum performance, when enabling Dual Channel
mode with two memory modules, we recommend that you install them in the DDR3_1 and DDR3_2
sockets.
The 1866 MHz memory speed is supported only when one or two DDR3 1866 MHz DIMMs are
installed. It is not supported when four DIMMs are installed. (Dual channel memory mode must be
enabled when installing two DIMMs.)
Hardware Installation
Dual Channel Memory Configurations Table
DDR3_4
DDR3_2
Two Modules
- -
DS/SS
DS/SS
- -
Four Modules
DS/SS
DS/SS
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
- 16 -
DDR3_3
DDR3_1
- -
DS/SS
DS/SS
- -
DS/SS
DS/SS

Advertisement

Table of Contents
loading

Table of Contents