Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
6 x SATA 3Gb/s connectors
1 x APU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
4 x USB 2.0/1.1 headers
1 x serial port header
1 x clearing CMOS jumper
1 x Trusted Platform Module (TPM) header
Back Panel
1 x PS/2 keyboard port
Connectors
1 x PS/2 mouse port
1 x optical S/PDIF Out connector
1 x HDMI port
6 x USB 2.0/1.1 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
Out/Line In/Line Out/Microphone)
I/O Controller
iTE IT8720 chip
Hardware
System voltage detection
Monitor
APU/System temperature detection
APU/System/Power fan speed detection
APU overheating warning
APU/System/Power fan fail warning
APU/System fan speed control
* Whether the APU/system fan speed control function is supported will depend on the
BIOS
2 x 32 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
APU/system cooler you install.
™
- 11 -
Hardware Installation