Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-A55-DS3P User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
 IGX Configuration
CPU Clock Ratio
CPU NorthBridge Freq.
Core Performance Boost (Note)
CPB Ratio
(Note)
CPU Host Clock Control
x CPU Frequency(MHz)
PCIe Spread Spectrum
Set Memory Clock
x Memory Clock
 DRAM Configuration
******** System Voltage Optimized ********
System Voltage Control
x CPU PLL Voltage Control
x DDR3 Voltage Control
x DDR VTT Voltage Control
x FCH Voltage Control
x APU VDDP Voltage Control
x CPU NB VID Control
higf: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
x CPU Voltage Control
Normal CPU Vcore
higf: Move Enter: Select
F5: Previous Values
Whether the system will work stably with the overclock/overvoltage settings you made is dependent
•
on your overall system configurations. Incorrectly doing overclock/overvoltage may result in dam-
age to CPU, chipset, or memory and reduce the useful life of these components. This page is for
advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
When the System Voltage Optimized item blinks in red, it is recommended that you set the System
•
Voltage Control item to Auto to optimize the system voltage settings.
(Note) This item is present only when you install a CPU that supports this feature.
MB Intelligent Tweaker(M.I.T.)
[Press Enter]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
100
[Disabled]
[Auto]
x6.66
[Press Enter]
[Auto]
Auto
Auto
Auto
Auto
Auto
Auto
+/-/PU/PD: Value
F6: Fail-Safe Defaults
MB Intelligent Tweaker(M.I.T.)
Auto
1.3625V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
- 35 -
Menu Level 
2400Mhz
2700Mhz
1333Mhz
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
Menu Level 
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Item Help
BIOS Setup