Advertisement
6. Zero Positioning of Chronograph Hands
(After Replacing the Battery)
When resetting the chronograph after replacing the battery, if the chronograph
second hand does not return to the 0 seconds position or if the chronograph second
hand has shifted out of position due to a strong impact, perform zero positioning of
the chronograph hands according to the procedure described below.
Chronograph minute hand
10
Chronograph second hand
Button (A)
18
Time correction position
Button (B)
[Chronograph Hand Zero Positioning]
1. Pull the crown out to the time correction position.
2. Press button (A) to position the chronograph second at the 0 position.
* The chronograph second hand can be advanced rapidly by depressing button
(A) continuously.
3. Once the chronograph second hand has been positioned at the 0 position, reset
the time and return the crown to the normal position.
4. Press button (B) to check that each of the chronograph hands has been reset to
the 0 position.
11
Advertisement
