Advertisement
3. Setting the Time
Hour hand
Second hand
In the case the crown is of the screw-lock type, loosen the screw by turning the
crown to the left before operating the crown, and after having returned the crown
to the normal position following operation, turn the crown to the right while push-
ing it in to securely retighten it.
4
Minute hand
18
Time correction position
1. Pull the crown out to the time correction position when the second hand has
reached the 0 seconds position.
2. Turn the crown to set the time.
* The 24 hour hand moves in conjunction with the hour hand. Pay attention to
AM and PM when setting the time.
3. Securely return the crown to the normal position in synchronization with a tele-
phone or other time service.
[Hint for Accurately Setting the Time]
After stopping the second hand at the 0 seconds position, turn the minute hand 4-5
minutes past the correct time and then turn it back to the correct time. The time on
the watch can then be set to the correct time by pushing in the crown in synchroni-
zation with a time service tone.
5
Advertisement
