Zero Positioning Of Chronograph Hands (After Replacing The Battery); Chronograph Minute Hand - Citizen F52 Instruction Manual

6. Zero Positioning of Chronograph Hands
(After Replacing the Battery)
When resetting the chronograph after replacing the battery, if the chronograph
second hand does not return to the 0 seconds position or if the chronograph second
hand has shifted out of position due to a strong impact, perform zero positioning of
the chronograph hands according to the procedure described below.
60

Chronograph minute hand

10
Chronograph second hand
60
Button (A)
24
12
Time correction position
60
Button (B)
[Chronograph Hand Zero Positioning]
1. Pull the crown out to the time correction position.
2. Press button (A) to position the chronograph second at the 0 position.
* The chronograph second hand can be advanced rapidly by depressing button
(A) continuously.
3. Once the chronograph second hand has been positioned at the 0 position, reset
the time and return the crown to the normal position.
4. Press button (B) to check that each of the chronograph hands has been reset to
the 0 position.
11