Electrolux ESI 6180 Instruction Book page 7

Function buttons:
in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- water softener setting,
- deactivation/activation of the inflow of rinse aid,
- deactivation/activation of the "3 IN 1" function,
- the cancelling of a programme in progress.
Programme selection push buttons:
a washing programme occurs by pressing one of these
buttons.
The digital display indicates:
- the level of hardness to which the water softener is set
- if the rinse aid inflow is activated/deactivated
- the approximative remaining time of the running programme
- the countdown of the delay start
- fault codes concerning malfunction of the dishwasher
"Delay start" option button
the start of the programme to be delayed from 1 to 19 hours.
Indicator lights:
have the following meanings:
salt refilling indicator light, illuminates when the salt
has run out
rinse aid refilling indicator light, illuminates when
the rinse aid has run out
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
Programme in progress: illuminates when a
washing programme has been setted and remains
illuminated for all the duration of the washing
programme.
Turns off when the washing programme has ended.
When delay start has been setted, this indicator light
turns off and will come on again once the
countdown has elapsed and the washing
programme has started.
3 in 1-function: indicates the activation/deactivation
of the 3 in 1-function (see "3 in 1 function").
the selection of
:
this option allows
27
"3 in 1" function:
this appliance is equipped with the
function 3 in1, that allows the use of the "3 in 1" combi
detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this option (indicator light illuminated) it will
remain active also for the following washing programmes.
(Indicator light off - function deactivated).
Once the programme is running, the "3 in 1" function can NO
longer be changed. If you want to exclude the "3 in 1" function
you have to cancel the programme setting (see chapter
"Starting a washing programme" - "To cancel a washing
programme in progress") and then deactivate the "3 in 1"
function.
In this case you have to set a washing programme again.
With the use of "3 in 1" combi detergent tablets, the cycle
durations given in the "Washing programmes" chart may
change.
Deactivation/activation of the 3 in 1 function
(The dishwasher must be switched off)
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
If other indicator lights are on, this means that a wash
programme has been selected. The programme must be
cancelled: press simultaneously function buttons 2 and 3
for about 2 seconds. All the indicator lights will turn off
(except for the On/Off indicator light and eventually
salt and rinse aid indicator lights) indicating that the setted
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, until
the indicator lights of function buttons 1, 2, 3 and 4
start flashing.
3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of the
function push button 4 goes on flashing.
4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the 3 in 1 funcion is active.
To deactivate the function press function button 4 again, the
indicator light turns off.
3 in1 function active
3 in 1 function not active
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
indicator light on
indicator light off