Stereo Sound Mode; Subtitle Language; Camera Angle; Changing The On-Screen Display - Denon DVD-1400 Operating Instructions Manual

PLAYING A DISC

Stereo Sound Mode

1 Press the AUDIO button repeatedly during playback to
select between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
STEREO
L-CH
R-CH
NOTES:
• If the Virtual Surround setting is ON, the sound mode will be
fixed to STEREO, and can not be changed.
• Stereo sound mode will not be changed when playing DTS
CD.
1 Press the SUPER AUDIO CD SETUP button
repeatedly to select among MULTI-CH, CD AREA, or
2CH.
MULTI-CH - playback in multi channel format. The number of chan-
nels depends on the disc being played.
CD AREA - Playback in the same quality with sound as normal CDs.
2CH - playback in higher quality than that of normal CD sound.
MULTI-CH
CD AREA
2CH
NOTES:
• The Virtual Surround setting is not available for Super Audio
CDs. (It may be possible to use the Virtual Surround setting
when playing back discs that include a CD area.)
• Some playback options may not be available. These will be
skipped.
• MULTI-CH is selected as default.

Subtitle Language

The DVD player allows you to select
a language for subtitle during DVD disc (if available) playback.
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3 To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
CD VCD
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
SUPER
AUDIO CD
DVD-V
– 23 –
1.ENG/6
2.FRE/6
OFF
NOTES:
• Some discs allow audio language setting/subtitle language
selection from the disc menu. (Operation varies between
discs, so please refer to the instructions accompanying the
disc.)
• If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
• If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change
the Subtitle language setting. If you choose any other lan-
guages, '---' will be displayed instead. (Refer to page 28.)

Camera Angle

Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the ( ) mark appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button during
playback to show current Chapter.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
2 Press the DISPLAY button again
to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
Subtitle 1
Subtitle 2
OFF
DVD-V
Angle 1
Angle 2
Angle 8
DVD-V
9/49 0:00:00 -0:00:00
EN