Marker Setup Screen; Virtual Surround - Denon DVD-1400 Operating Instructions Manual

PLAYING A DISC
3 Press the DISPLAY button the
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
4 Press the DISPLAY button the fourth time to remove
the display.
1 Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the disc will
be displayed.
2
Press the DISPLAY button again to show the Total
Tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
3
Press the DISPLAY button a third time to remove the
display.
1
Press the DISPLAY button during playback. The
current Track will be displayed on the TV screen.
• The file name of the current track will be displayed.
2
Press the DISPLAY button again to show the Total
Tracks.
• The elapsed playing time of the disc will be displayed.
3 Press the DISPLAY button a third time to remove the
display.
You can check information about the current disc
by pressing the DISPLAY button on the remote control.
1
Press the DISPLAY button during playback to show the
current Track.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show the current
Group.
• The elapsed and remaining play-
ing time of the current group will
be displayed.
3 Press the DISPLAY button a
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered disc, the layer number
will also be displayed (L0: Layer 0 is playing. L1: Layer
1 is playing).
4 Press the DISPLAY button a fourth time to remove
the display.
IIII T
SUPER
CD VCD
AUDIO CD
MP3 JPEG WMA
DVD-A
IIII
T

Marker Setup Screen

DVD-A DVD-V
Use markers to memorise
your favourite places on a disc.
1 Press the SEARCH MODE but-
ton four times (CD, Super Audio
CD, VCD: three times) during
playback.
• The display screen and Markers will appear on the TV screen.
2 Press the s or B button to select 1, 2, 3, 4, 5, 6, 7,
8, 9, or 10 and ensure that "- : - - : - -" appears in the
display.
3 When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press the SEARCH
MODE button four times (CD, Super Audio CD,
VCD: three times) during playback and the s or B
button to choose the desired marker, then press
the ENTER button.
NOTES:
• All Markers will be erased when opening the disc tray,
switching off the power or when AC is selected in step
2
and you press the ENTER button.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
5
Press the SEARCH MODE or RETURN button to
exit.

Virtual Surround

DVD-A DVD-V
You can enjoy stereophonic visual space on your existing 2
channel stereo system.
1 Press the VIRTUAL button on the front panel or
press the MODE button during playback.
2
Press the VIRTUAL or ENTER
button to set it 1(Natural
effect), 2(Emphasized effect)
or OFF.
3
Press the RETURN button to
exit.
NOTES
:
• Select Virtual Surround OFF or lower the volume if the
sound is distorted.
• When MULTI CHANNEL is selected as the audio chan-
nel in the audio setting on the setup menu, Virtual
Surround does not function. For more details, see page
26.
• The Virtual Surround setting is not available for Super Audio
CDs. (It may be possible to use the Virtual Surround setting
when playing back discs that include a CD area.)
– 24 –
SUPER
CD VCD
AUDIO CD
-- -- : -- : --
CD VCD MP3
WMA
OFF
EN