Table of Contents
Advertisement
Available languages
Available languages
PLAYING A DISC
Stereo Sound Mode
1
Press the AUDIO button repeatedly during play-
back to select between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
STEREO
L-CH
R-CH
NOTE:
•
If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
•
Stereo sound mode will not be changed when playing DTS CD.
Subtitle Language
The DVD player allows you to select
a language for subtitle during DVD disc (if available) playback.
1
Press the SUBTITLE button during playback.
2
Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
1.ENG/6
2.FRE/6
OFF
NOTES:
•
Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
•
If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
•
If you choose a Language that has a 4-letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, '---' will be displayed instead. (Refer to page 28.)
CD
VCD
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
DVD-V
Subtitle 1
Subtitle 2
OFF
– 23 –
Camera Angle
Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the (
) mark appears on the screen.
1
Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8
Changing the On-Screen Display
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1
Press the DISPLAY button during
playback to show current Chapter.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
2
Press the DISPLAY button again
to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press the DISPLAY button the
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
4
Press the DISPLAY button the fourth time to remove
the display.
CD
VCD
1
Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2
Press the DISPLAY button again to show current
Total Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
3
Press the DISPLAY button the third time to remove
the display.
DVD-V
Angle 1
Angle 2
Angle 8
DVD-V
9/49
0:00:00 -0:00:00
IIII
T
MP3
JPEG
WMA
EN
Advertisement
Chapters
Table of Contents
