D-Link DI-524 Manual page 31

Using the Configuration Menu (continued)
At this page, the DI-524 administrator can change the system password. There are two
accounts that can access the Broadband Router's Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access.
User can only view the settings but cannot make any changes.
Administrator-
Password-
User-
Password-
Remote Management-
from the Internet by a web browser. A username and password is still required to ac-
cess the Web-Management interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks. This feature enables
you to perform Administrator tasks from the remote (Internet) host.
IP Address-
The Internet IP address of the computer that has access to the Broad-
band Router. If you input an asterisk (*) into this field, then any computer will be able
to access the Router. Putting an asterisk (*) into this field would present a security risk
and is not recommended.
Port-
The port number used to access the Broadband Router.
Example-
http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Mangement interface.
Tools> Admin
admin is the Administrator login name
Enter the password and enter again to confirm
user is the User login name
Enter the password and enter again to confirm
Remote management allows the DI-524 to be configured
31