D-Link DI-524 Manual page 13

Hide thumbs Also See for DI-524:

Table of Contents

Using the Configuration Menu (continued)

Network ID(SSID)-

Channel-

Security-

WEP Encryption-

Key Mode-

Keys 1-4-

Home > Wireless

Service Set Identifier (SSID) is the name designated for a specific

wireless local area network (WLAN). The SSID's factory default

setting is default. The SSID can be easily changed to connect

to an existing wireless network or to establish a new wireless

network.

6 is the default channel. All devices on the network must share

the same channel. (Note: The wireless adapters will automatically

scan and match the wireless setting.)

Select None, WEP, 802.1X, WPA-PSK or WPA. None is the

default setting. (Note: if you enable encryption on the DI-524,

please make sure that you also enable encryption on all the

wireless clients, or wireless connection will not be established.)

Select the level of encryption desired: 64-bit, or 128-bit

Select HEX or ASCII

Input up to 4 WEP keys; select the one you wish to use.

Table of Contents

Show Quick Links

Table of Contents