Installation; Installing The Sim Card, Memory Card And The Battery - Doro PHONEEASY 611 Manual

Hide thumbs Also See for PHONEEASY 611:
Table of Contents

Advertisement

IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.

Installing the SIM card, memory card and the battery

The SIM and memory card holders are located inside the battery
compartment.
1.
Remove the battery cover and the battery if it is already installed.
2.
Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card's contacts are facing inwards and that the cut
off corner is pointing downwards. Take care not to scratch or
bend the contacts on the SIM card.
3.
To insert a memory card by gently sliding it into the holder. Make
sure that the memory card's contacts are facing inwards and that
the cut off corner is pointing upwards. Take care not to scratch or
bend the contacts on the memory card.
To remove the memory card: find the small ridge on the exposed
end of the memory card. Put your fingernail into the ridge and
gently pull the memory card out.
4.
Insert the battery by sliding it into the battery compartment with
the contacts facing upwards to the left. Replace the battery cover.
English

Installation

1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents