Table of Contents
Advertisement
Erase USB
This function enables you to delete the data saved on the
USB DAQ: the DAQ must be connected to the motorcycle
wiring.
To delete the data, go into the menu and select the
"Erase USB" page.
If you hold the button (1, fig. 8) in position B "▼" for
3 seconds and the USB DAQ is not acquiring data, the
E
message "WAIT..." appears on the display for 10 seconds.
B= On 3 sec.
After 10 seconds, the message "OK" appears for 2 seconds,
to confirm that the data has been deleted.
If you hold the button (1, fig. 8) in position B "▼" for
YES
3 seconds and the USB DAQ is acquiring data, the DAQ
USB=ON
memory is not cleared and the display shows the message
"ERASE FAIL" for 2 seconds.
NO
display 2 sec.
WAIT of 4 sec.
display 2 sec.
fig. 22
28
Advertisement
Table of Contents
