Table of Contents
Advertisement
Cleaning and care
Warning: Before cleaning, switch off the appliance and let it cool down.
Warning: For safety reasons, do not clean the appliance with steam jet or high-pressure
cleaning equipment.
Important: Do not use corrosive cleaners, sharp objects or stain removers.
Do not use abrasive substances or metal scrapers to clean the glass oven door, as this
could scratch the surface. This could cause the glass to shatter.
Outside of the appliance
• Wipe the front of the appliance with a soft cloth and a solution of hot water and
washing up liquid.
• For metal fronts, use normal commercially available cleaning agents.
• Please do not use scouring agents and abrasive sponges.
Oven interior
Cleaning
The catalytic-coated walls are self-cleaning. They absorb fat splashes while the oven is in
operation.
In order to support this self-cleaning process, we recommend heating the oven at regu-
lar intervals with no food in it.
1. For cleaning, turn the oven light on.
2. Also wipe the oven out with a warm solution of water and washing-up liquid and then
dry it.
3. Set oven temperature to 250°C.
4. Turn the oven off after one hour.
5. If any residues remain, wipe them off with a damp, soft sponge.
Important! Do not use oven spray or abrasive cleaners. Do not use soap or other clean-
ing agents. These can damage the catalytic metal.
After prolonged use, the catalytic coating may discolour slightly. This has no effect on
the catalytic properties.
Accessories
Rinse and dry all accessory parts thoroughly after every use. For easier cleaning, leave to
soak for a while.
Cleaning and care
31
Advertisement
Table of Contents
