Lenovo ThinkPad USB Keyboard User Manual page 22

Problem: You pressed a button once, but the computer responded as if you pressed it twice.
Solution: Depending on your operating system, adjust the keyboard Repeat delay or Repeat rate settings
by doing one of the following:
• For Windows XP and Windows Vista:
1. Depending on your Start menu mode, click Start ➙ Control Panel or Start ➙ Settings ➙ Control
Panel
2. Depending on your Control Panel mode, click or double-click Keyboard.
3. Click the Speed tab.
4. Move the Repeat delay slider to Long or the Repeat rate slider to Slow.
5. Click OK.
• For Windows 7:
1. Depending on your Start menu mode, click Start ➙ Control Panel or Start ➙ Settings ➙ Control
Panel
2. Click the View by menu and select Small icons or Large icons. The All Control Panel Items
category is expanded.
3. Click Keyboard.
4. Click the Speed tab.
5. Move the Repeat delay slider to Long or the Repeat rate slider to Slow.
6. Click OK.
• For Windows 8 or Windows 8.1:
1. To go to Control Panel, move the pointer to the top-right or bottom-right corner of the screen to
display the charms. Click Search and then search for Control Panel.
2. Click the View by menu and select the Small icons or Large icons view. The All Control Panel
Items category is expanded.
3. Click Keyboard.
4. Click the Speed tab.
5. Move the Repeat delay slider to Long or the Repeat rate slider to Slow.
6. Click OK.
Problem: The keyboard does not function correctly.
Solution: Verify if the keyboard cable is firmly connected to the USB connector, or reconnect the keyboard
cable to another USB connector on the computer. If the problem persists, contact your Lenovo service
representative.
18
ThinkPad USB Keyboard with TrackPointUser Guide