Installation Of The Taste Guard Filter - Electrolux ERF3867SOX User Manual

18 www.electrolux.com

7.8 Installation of the Taste Guard filter

7.9 Starting the water system
for the first time.
Ensure proper connection to the water
supply, refer to "Connecting the water
hose".
7.10 Installation of the gas cylinder
The Taste Guard filter is an active carbon
filter which absorbs bad odors maintain
the best flavour and aroma for all food-
stuffs without risk of odor cross contami-
nation.
On delivery the carbon filter is in a plastic
bag to preserve performance.
• Open the air lever flap.
• Take the filter out of the plastic bag.
• Insert the filter in the slot found in the
back of the air lever flap.
• Close the air lever flap.
The filter should be handled care-
fully so fragments do not loosen
from the surface.
Make sure that the air lever flap is
closed to obtain proper function.
1. Open the tap on the water connec-
tion.
2.
Start the refrigerator.
The water system main valve opens and
the pump starts to fill the system.
• Remove the gas cylinder wrapping and
screw on the adapter to the gas cylin-
der. Tighten by hand only.