Programming A Dvd Or Cd - GPX D108S Instruction Manual

Programming a DVD or CD

1. Insert a DVD or CD into the unit.
. After the DVD or CD is inserted and loaded, press the Program Button on the
remote control to display the Program Menu.
3. Use the Directional Buttons to move through the different program slots.
4. Highlight a slot and enter a Title (TT) number and Chapter (CH) number using the
Enter Button and Number Keypad on the remote control. Repeat steps 3 and 4
until the desired titles and chapters are programmed.
5. Highlight Start in the main menu and press the Enter Button to begin playing the
programmed titles and chapters.
Programming a CD
8
D108S-IB (Cost Down).indd 8 3/6/008 10:51:34 AM