Playing a DVD or CD and Viewing a Photo Slideshow ... 7 Programming a DVD or CD ... 8 Using the Coaxial Output... 9 Controls & Definitions ... 10-14 The Setup Menu ... 15 Service Information... 16 D108S-IB (Cost Down).indd 1 3/6/008 10:51:30 AM...
WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only with the same or equivalent battery. D108S-IB (Cost Down).indd WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
This plug will fit into the power outlet only one way. This is a safety D108S-IB (Cost Down).indd 3 feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your 19.
The Power Indicator Light will illuminate red when the power is off and green when the power is on. Remote Batteries D108S-IB (Cost Down).indd 5 AAA-Size Batteries - Do not mix old and new batteries. - Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni- cad, ni-mh, etc) batteries.
If you are experiencing problems while trying to adjust the input settings on your television, please contact your television’s manufacturer for assistance. 4. Video played through the unit will now be seen and heard on the connected television. D108S-IB (Cost Down).indd 6 Television 3/6/008 10:51:34 AM...
4. Press the Stop Button to stop the JPEG or Photo CD during play. 5. Press the Skip Buttons to skip backwards or forwards through separate jpegs on a JPEG or Photo CD. Note: When viewing JPEGs, the zoom feature will not work. D108S-IB (Cost Down).indd 7 3/6/008 10:51:34 AM...
Enter Button and Number Keypad on the remote control. Repeat steps 3 and 4 until the desired titles and chapters are programmed. 5. Highlight Start in the main menu and press the Enter Button to begin playing the programmed titles and chapters. Programming a CD D108S-IB (Cost Down).indd 8 3/6/008 10:51:34 AM...
. Turn the unit on by pressing the Power Button. 3. Change the stereo system to the correct audio input setting. 4. Audio played through the unit will now be heard on the connected television or stereo system. D108S-IB (Cost Down).indd 9 Surround Sound System 3/6/008 10:51:35 AM...
Press the Skip Buttons to skip through a DVD’s chapters or a CD’s tracks. 9 Power Button Press the Power Button to turn the unit off or on. 10 Stop Button Press the Stop Button to stop a DVD or CD during play. D108S-IB (Cost Down).indd 11 3/6/008 10:51:35 AM...
Page 13
Press the Play/Pause Button to play or pause a loaded DVD or CD. 26 Directional Buttons Use the Directional Buttons to navigate through a DVD or CD. 27 Step Button Press the Step Button to skip through a playing movie one frame at a time. D108S-IB (Cost Down).indd 13 3/6/008 10:51:36 AM...
Page 14
B point and repeat the section of movie between the A point and the B point. 34 OSD Button Press the OSD Button to view the on screen display and see time information on the DVD or CD that is playing. D108S-IB (Cost Down).indd 14 3/6/008 10:51:36 AM...
Disc Menu Use the Disc Menu setting to select the written language on the DVD’s main menu. The DVD Menu setting is dependent on the DVD content. Default The Default Settings button will change all settings back to the original factory defaults. D108S-IB (Cost Down).indd 15 3/6/008 10:51:36 AM...