Jeep 2011 Grand Cherokee Owner's Manual page 459

1. Bring the vehicle to a complete stop, leaving it con-
nected to the tow vehicle.
2. Firmly apply the parking brake.
3. Reconnect the negative battery cable.
4. Turn the key fob to the LOCK/OFF position (if it has
been moved or the engine has been started).
5. Turn the key fob to the ON/RUN position, but do not
start the engine.
6. Press and hold the brake pedal.
7. Shift the transmission into NEUTRAL.
8. Using the point of a ballpoint pen or similar object,
press and hold the recessed transfer case N (Neutral)
button (located by the selector switch) for four seconds,
until the light behind the N symbol starts to blink,
indicating shift in progress. The light will stop blinking
(go out) when shift is complete. The "FOUR WHEEL
DRIVE SYSTEM IN NEUTRAL" message will no longer
be displayed on the EVIC (Electronic Vehicle Information
Center). Refer to "Electronic Vehicle Information Center
(EVIC)" in "Understanding Your Instrument Panel" for
further information.
Neutral Switch
STARTING AND OPERATING 457
5