Changing The Dust Bag - Bosch BSG81396UC Use And Care Manual

Changing the dust bag

Replacing the MEGAfilt
If the dust bag change indicator lights up brightly
and uniformly when the nozzle is lifted from the floor
and the vacuum is on its highest setting, you
should change the dust bag, even if it is not yet full.
In this case it is essential to change the dust bag
due to the type of material it contains.
Turn the dust compartment locking lever in the
direction of the arrow to open the dust compartment
cover.
Seal the MEGAfilt
sealing strip and pull up to remove the bag.
Place a new MEGAfilt
holder and close the dust bag compartment cover.
!
Caution: The dust bag compartment cover will
only close when the MEGAfilt
bag, textile filter or dust collector has been
inserted.
If the dust bag change indicator continues to
light up after the dust bag has been changed,
please check whether the nozzle, pipe or
vacuum hose are obstructed.
® SuperTEX dust bag
® Super TEX dust bag by pulling the
® SuperTEX dust bag in the
® SuperTEX dust
13