Changing The Dust Bag And Filters; When The Work Is Done - Bosch BSG72225 Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
en
14*
Figure
Pet hair tool
Floor tool for easy and thorough
vacuuming of pet hair.
Push the telescopic tube into the
connecting piece of the pet hair tool until it
engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
To clean, simply vacuum the tool using the
suction pipe/telescopic tube.
15*
Figure
Hard-floor brush
For cleaning hard floor coverings
(tiles, parquet flooring, etc.)
Connect the floor tool and the telescopic
tube together.
16
Figure
Once you have switched off the vacuum
cleaner, you can use the parking aid on the
back of the vacuum cleaner if you wish to
stop vacuuming for a short time.
To do this, slide the catch on the floor tool
into the groove on the back of the vacuum
cleaner.
17
Figure
The vacuum cleaner can also be carried
using the swing handle to overcome
obstacles, e.g. steps.

When the work is done

18
Figure
Unplug the vacuum cleaner.
Briefly pull the power cord and release.
The cord rewinds automatically.
19
Figure
To store or transport the vacuum cleaner,
use the storage aid on the underside of the
vacuum cleaner.
Stand the vacuum cleaner up on its end.
Slide the catch on the floor tool into the
groove on the underside of the vacuum
cleaner.
Changing the dust bag and
filters
Replacing the dust bag
20
Figure
If the dust bag change indicator is
completely yellow when the floor tool is
lifted from the floor and the highest suction
power is selected, the dust bag must be
changed, even though it may not yet be
full. In this case it is essential to change
the dust bag due to the type of material it
contains.
First check that the nozzle, suction pipe
and flexible hose are not blocked, as this
would also lead to the dust bag change
indicator being triggered.
21
Figure
Open the lid by moving the locking lever in
the direction of the arrow.
22
Figure
a) Seal the MEGAfilt
pulling the sealing strip and then remove it.
b) Insert a new MEGAfilt
into the holder and close the dust bag
compartment lid.
Caution: the lid will only close when the
!
MEGAfilt
SuperTEX dust bag is
®
inserted.
SuperTEX dust bag by
®
SuperTEX dust bag
®
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bsg7

Table of Contents