Customizing The Audio Settings - Garmin STREET PILOT 7200 Owner's Manual

C Y S P
USTOMIZING OUR TREET ILOT
Voice Language—change the language for all voice
prompts and messages. Touch the voice you want to
use and touch OK. To delete that voice from your
StreetPilot, touch Delete
Your StreetPilot contains two different types of voice
languages: text-to-speech and pre-recorded.
Languages noted with a person's name and (TTS) are
text-to-speech (TTS) voices: for example, American
English-Jill (TTS) is a text-to-speech voice. The text-to-
speech voices "read" and "speak" the same words that
appear on the StreetPilot. The voices have an extensive
vocabulary, and they pronounce the street names as you
approach turns.
Languages without a person's name are pre-recorded
voices, which have a limited vocabulary and do not
speak names of locations or streets.
NOTE: If you change the voice language, your
StreetPilot must restart to complete this change.
40
and OK.
Text Language—change the on-screen text to the
selected language. Changing the text language does not
change the language of map data or user-entered data.
Speech Rate—select the rate for voice prompts.
Customizing the Keyboard
From the Menu page, touch
Keyboard.
Input Type—select the
select West European to use diacritical characters.

Customizing the Audio Settings

From the Menu page, touch
Audio.
Guidance—turn on the vocal guidance prompts. Select
Speak Key Only to hear the prompts only when you
press the SPEAK key on the remote control.
Attention Tone—turn on or off the attention tone
sounded before voice prompts.
Settings > General
English Only keyboard, or
Settings > General
StreetPilot 7200/7500 Owner's Manual
>
>