Table of Contents
Advertisement
Water inflow
A 1.50 m long pressure hose is supplied with the ap-
pliance.
If a longer water inlet hose is required, only original
hoses are to be used. The Customer Care Depart-
ment stocks hose kits of different lengths.
3
Sealing rings are either inserted in the plastic
nuts of the threaded hose fitting or are includ-
ed as spare parts . Do not use any other seals.
Important! All threaded hose fittings must only be
tightened by hand.
1. Connect the hose with the right-angle connector to
the machine.
Important! Do not position the inlet hose vertically
downwards. Position it to the right or the left as
shown in the illustration.
2. Connect the hose with the straight connector to a
water tap with an R ¾ (inch) screw thread.
3. Open the water tap slowly and check all connec-
tions for water tightness.
27
Hide quick links:
Advertisement
Table of Contents
