Table of Contents
Advertisement
Enable Setting
Title
Motion Detection
Digital Input
1 ~ 2
Enable Schedule
Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Trigger digital
output for xx
second(s).
Check this box to enable this event. If you just want to disable this
event temporarily, you can uncheck this box to keep this event and
disabling while not deleting it.
Input any description text for this event so you can identify it quickly.
You can use alphabets, numbers, and symbols include: !$-.@^_~
(no spaces allowed).
Check this box and this event will be activated when one of motion
detection window detects motion.
Check this box and this event will be activated when digital input 1 or
2's input signal is high or low (select from dropdown list).
Check this box and this event will be activated when designated
weekday and time is reached.
You also have to check weekday box, and select time from
dropdown list. If you select 'Always' as time, this event will be
activated during all the day.
Check this box and IP camera will save file on FTP server (refer to
'FTP Server' setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will send an Email to designated
recipient address (refer to 'SMTP Server' setting in 'Event Server'
tab) when this event is activated.
Check this box and IP camera will save file on samba server (refer to
'Samba Server' setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will trigger digital out to 'high' state
for xx seconds when this event is activated, where 'xx' seconds
must be defined by the dropdown list.
56
Advertisement
Table of Contents
