Copy Manager; Connect A Usb Hard Drive; Accessing Copy Manager - Western Digital My Book User Manual

Copy Manager

13
The network storage system's Copy Manager feature allows you to copy data from a
USB hard drive to the network storage system or copy data from the network storage
system to a USB hard drive.
Important: When copying data, always connect the USB hard drive
directly to a USB port on the network storage system. Do not use a USB
hub. Ensure that the destination drive has enough free space to store the
amount of data being transferred.
Important: USB hard drives that are formatted with FAT32 are limited to
copying only 4 GB for each file. If you try to transfer files that are larger than
4 GB, you may encounter a Copy Termination error.

Connect a USB hard drive

Before using Copy Manager, be sure to connect a USB hard drive to the USB port
on the rear of the network storage system. See "Connecting a USB Hard Drive" on
page 46 for instructions.

Accessing Copy Manager

You can access Copy Manager by entering the system's web-based user interface.
See "Accessing Network Storage Manager" on page 58 for instructions.
1. In the Tools list, click Copy Manager.
2. Enter the administrator name and password, and then click Login.
MY BOOK WORLD EDITION
USER MANUAL
COPY MANAGER - 123