Assembly - ProForm 764hr Bike User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex
keys, assembly requires a phillips screwdriver , an adjustable spanner , and a
rubber mallet .
As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The
number in parentheses below each drawing is the key number of the part, from the PART LIST on page 22. The
second number is the quantity used in assembly. Note: Some small parts may have been preassembled for
shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M6 Flat M6 Nylon M10 Zinc Split M10 Zinc M10 Black Nylon M10 Zinc Nylon
Washer (71)–1 Locknut (45)–4 Washer (93)–2 Locknut (63)–2 Locknut (66)–2
Washer (85)–2
1/2" Nylon M4 x 16mm M4 x 22mm M6 x 16mm M6 x 25.4mm Button M8 x 12mm Button
Locknut (52)–1 Screw (73)–5 Screw (91)–2 Screw (64)–5 Screw (79)–1 Screw (94)–4
M10 x 45mm Button
M6 x 32mm Button M6 x 50mm Screw (69)–1
Screw (74)–2
Screw (83)–4
M10 x 52mm Zinc Button Bolt (68)–2 1/2" x 70mm Button Bolt (51)–1
M10 x 112mm Carriage Bolt (65)–2
4