Audio; Others - GoVideo DV1140 User Manual

DVD Operation Setup (Continued)

AUDIO

Each DVD disc has a variety of audio output options.
Set the player's Audio Output according to the type of
audio system you use.
Dolby Digital
Bitstream: Select "Bitstream" if you connected the DVD
Player's DIGITAL OUT jack to a Dolby Digital decoder
(or an amplifier or other equipment with a Dolby Digital
decoder).
PCM: Select when connected to a two-channel digital
stereo amplifier. DVDs encoded in Dolby Digital will be
automatically downmixed to two-channel PCM audio.
DTS
Bitstream: Select "Bitstream" if you connected the DVD
Player's DIGITAL OUT jack to a DTS decoder (or an
amplifier or other equipment with a DTS decoder).
Off: If you select "Off", the DTS signal through the DIGI-
TAL OUT jack is not outputted.
MPEG
Bitstream: Select "MPEG" if you connected the DVD
Player's DIGITAL OUT jack to a MPEG decoder (or an
amplifier or other equipment with a MPEG decoder).
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD+VCR outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the MPEG1, or MPEG2 recording system.
Sample Freq. (Frequency)
To change the Sample Frequency setting, first select
the desired Dolby Digital, DTS, and MPEG mode as
indicated as above.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz, so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit will pass through each type of signal
without any further processing.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest and
quietest scenes), e.g., when watching a movie late at
night. With DRC set to ON, you can listen to a movie at
a lower volume without losing sound clarity.
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.

OTHERS

The AutoPlay setting can be changed.
OTHERS
AutoPlay
AutoPlay
DVD
When you load a DVD with AutoPlay turned on, the
DVD +VCR will bypass the Disc menu and trailers and
start playing the movie automatically. Set AutoPlay to
ON or OFF.
Off
Move Select
19