Table of Contents
Advertisement
Basic Recording
Recording from TV
Follow these steps to record a TV show to
DVD.
1
Insert a blank DVD+R or DVD+RW
disc into the disc tray.
• Press OPEN/CLOSE to open and
close the disc tray.
• When you insert a blank disc, the
DVD Recorder will format (or "initial-
ize") the disc automatically.
2
Press GUIDER
Guider" menu.
3
Use to select "Record" , then press
ENTER.
Record
Erase
4
Use to select "TV" , then press
ENTER.
TV
AV1
AV2
S-Video
DV
5
Use to select the channel you
want to record, then press ENTER.
25
CH
to display the "Easy
Playback
EXIT
Finalize
EXIT
EXIT
• If you are using a cable box/satellite
receiver, set the DVD recorder to the
receiver's output channel (2, 3 or 4)
and select the desired channel on
the cable box/receiver.
6
Select the desired recording quality
and press ENTER.
1hr HQ
2hr SP
4hr EP
6hr SLP
HQ (best) – 1 hour/disc
SP (better) – 2 hours/disc
EP (good) – 4 hours/disc
SLP (fair) – 6 hours/disc
7
Press ENTER to start recording.
• To pause recording, press PAUSE.
• To resume recording, press PAUSE
again.
• To view the status of your recording,
press DISPLAY.
8
When finished, press STOP to stop
recording.
• The disc is updated with the new
recording.This may take a few min-
utes to complete.
• To watch your recording, see page
32.
• To finalize your disc to play on other
DVD players, see page 37.
NOTE:
• You cannot change channels or
record quality during recording.
4 - Operations
EXIT
29
Advertisement
Table of Contents
