Congratulations! Congratulations on your purchase of this R6750 DVD Recorder. We know you will enjoy this product for many years to come. In case service is required, please take a moment to write down your serial number located on the rear panel of the DVD Recorder: ______________________________________________________ ��������...
DVD Recorder User’s Guide must not be blocked or covered.The open- ings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.This product should not be placed in...
Page 5
Important Safety Instructions mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 16 Lightning - For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet...
Welcome This Chapter provides a basic introduction to the DVD Recorder, including an overview of the front panel, rear panel, and remote control. DVD Recorder User’s Guide...
Unpacking Check to make sure the following items are included with your DVD Recorder: ������ ������� ��� ��������� ������ ����� ����� ��������� ����� Compatible Media This DVD Recorder will play the following discs: • • Audio CD • Video CD/Super Video CD •...
7 INPUT button* 8 PLAY button 9 STOP button 10 PAUSE button 11 DV Input 12 AV IN 1 jacks � � � � R6750 DVD+R/RW RECORDER INPUT LINE IN 2 DV IN VIDEO L - AUDIO - R �� ��...
3 S-VIDEO IN jack 4 AV IN 2 jacks 5 COMPONENT VIDEO OUT jacks • The ANTENNA PASSTHROUGH jack outputs the TV signal only, and is NOT for DVD playback. DVD Recorder User’s Guide AUDIO IN AUDIO OUT S-VIDEO IN VIDEO...
Remote Control Remote control overview: OPEN/CLOSE POWER � � DISC TITLE MENU � PREV � STOP PLAY PAUSE/STEP � � � ENTER GUIDER � INPUT RECORD TIMER � �� �� �� �� DISPLAY �� SETUP �� �� NEXT �� �� PLAY OPTIONS ��...
Connections This Chapter shows you how to connect the DVD Recorder to your TV and other home theater com- ponents. • • DVD Recorder User’s Guide For basic connections, see pages 13-15. For advanced connections, see pages 16-19.
PASSTHROUGH (NO DVD OUTPUT) NOTE: • Do not connect the AC power cord until all other connections have been made. • The DVD Recorder receives broadcast channels 1-69 and cable TV channels 1-125. AUDIO IN AUDIO OUT S-VIDEO IN VIDEO...
ANTENNA IN ANTENNA PASSTHROUGH (NO DVD OUTPUT) NOTE: • With this connection, you will set the DVD Recorder to channel 2, 3, or 4 and then select channels on the cable box. DVD Recorder User’s Guide ����� ������ �� AUDIO IN...
If your TV has standard audio/video inputs (red, white, and yellow RCA jacks): Connect the supplied audio/video cables from the DVD Recorder to your TV as shown. Connect the supplied power cable from the DVD Recorder to a standard wall out- let. Press POWER to turn on the DVD Recorder.
If your TV has S-Video or Component Video inputs, you can enjoy superior picture quality. Connect an S-Video cable OR set of Component Video cables from the DVD Recorder to your TV as shown. Select the S-Video or Component Video input on your TV to view the DVD Recorder.
��� �������� NOTE: • If you use the Optical or Coaxial connection, you must set the DVD Recorder’s Audio Output settings to match the capabilities of your receiver; see page 26. • If your receiver is equipped with a Dolby Digital and/or DTS decoder your can enjoy 5.1 surround sound playback while watching DVD movies.
DVD Recorder as shown. Connect an S-Video cable and audio cables from the outputs of the external device to the inputs of the DVD Recorder as shown. Press INPUT until AV2-Rear or S-Video appears on the screen.
• To view the external device, press INPUT on the remote control until AV1-Front or DV appears on screen. • To record from the external device, see page 30. ��� �������� R6750 DVD+R/RW RECORDER INPUT LINE IN 1 VIDEO L - AUDIO - R ��...
Key settings: • • • DVD Recorder User’s Guide To set the date and time, see page 22. To set your TV aspect ratio, see page 24 To search for TV channels, see page 27.
Setup Menu Overview The Setup menu allows you to customize your DVD Recorder. Choose from six categories: • System Settings – see page 22 • Language Settings – see page 23 • Playback Settings – see page 24 • Record Settings – see page 25 •...
Sets the sleep timer. Press SETUP. Select System > Auto-sleep. Set the timer from 30 to 120 minutes. • The DVD Recorder will power off automatically after the specified time has elapsed. • To disable the sleep timer, select Off.
Select Language > Audio. Select your preferred DVD Audio lan- guage. • If YourDVD is turned on (see page 24), the DVD Recorder will search and select your preferred Audio and Subtitle languages automatically whenever you load a DVD movie.
4:3 Pan - Select if you have a stan- dard TV and prefer to have widescreen movies cropped (“Pan & Scan”) to fit the screen. DVD Recorder User’s Guide Parental Control Blocks playback of rated DVDs based on their content. Not all discs are rated. Press SETUP.
Record Settings Record Quality Sets the default quality for DVD recording. Press SETUP. Select Record > Quality. Choose from the following: HQ (best) – 1 hour/disc SP (better) – 2 hours/disc EP (good) – 4 hours/disc SLP (fair) – 6 hours/disc Auto Chapter Marking Enables automatic chapter marking at regular intervals during DVD recording.
Press SETUP. Select Audio > Digital Out. Choose from the following: PCM – Select if the DVD Recorder is connected to a 2-channel (stereo) digital amplifier. Bit Stream - Select if the DVD Re- corder is connected to a 5.1 channel amplifier/receiver with a Dolby Digital...
Choose from the following: Antenna - Select if the DVD Recorder is connected to an antenna. Cable - Select if the DVD Recorder is connected to a cable TV source. Auto - Select to have the DVD Re- corder automatically detect if you are using an antenna or cable.
Operations This Chapter shows you how to use the most com- mon features of the DVD Recorder, including re- cording, playback, and editing DVDs. • • • DVD Recorder User’s Guide For recording features, see pages 29-31. For playback features, see pages 32-34.
• To finalize your disc to play on other NOTE: EXIT • You cannot change channels or receiver, set the DVD recorder to the receiver’s output channel (2, 3 or 4) and select the desired channel on the cable box/receiver.
• You can also use Easy Guider to record from an external source. Just follow the steps on page 29, but on Step 4, select “AV1” ,“AV2” ,“S-Video” or “DV” instead of “TV” . DVD Recorder User’s Guide Press REC to start recording.
• If you have not set the date and Press POWER to turn off the DVD Recorder. • The DVD Recorder must be turned • The TIMER indicator on the front • Timer Recording continues until is a problem with the timer record- ing.
• You can also press GUIDER DVD Recorder User’s Guide Playing a DVD+R/+RW Follow these steps to play a DVD that you’ve recorded on the DVD Recorder. Press POWER to turn on the DVD Recorder. Load your DVD+R/RW in the disc tray with the label side up.
Special Playback Options Special Options During Playback DISC MENU DISC MENU Displays the DVD Disc Menu (if available). Use the and ENTER keys to select options in the Disc Menu. TITLE TITLE Displays the DVD Title Menu (if available). DISPLAY DISPLAY Displays playback infor-...
Press STOP to stop MP3 playback. • If your CD-R/RW has both MP3 and JPEG files, use PREV and NEXT to browse the MP3 files, and to browse the pictures. DVD Recorder User’s Guide Photo CD Playback To play JPEG files on CD-R/RW: Load the JPEG disc in the disc tray.
Editing Options About Title Editing Once you have recorded a Title to a DVD+R/RW disc, you can name, protect, overwrite, or erase it using the Title Editor menu. Press PLAY or GUIDER DVD Disc Menu. Use the keys to select the desired Title, then press EDIT to dis- play the “Title Edit”...
• The channel moves to the new posi- tion. Swap Channels Allows you to swap the TV channel order stored in the DVD Recorder to match the channel order stored in your TV set. Use to select the channel to be swapped and press .
Formatting/Finalizing Discs What is Formatting? • Formatting completely erases a DVD+RW so it can be recorded on again. • You cannot erase and reformat a DVD+R disc. • Make sure you have safely backed up your DVD+RW disc before refor- matting because all contents will be erased.
The Troubleshooting section below will help you solve common issues with your DVD Recorder. If you don’t find the answers you need here, you can contact our Customer Service Department as follows: Phone (800) 736-7679 E-Mail customersupport@govideo.com www.govideo.com Troubleshooting SYMPTOM No power. No picture.
Page 40
SYMPTOM Picture or sound of broadcasting channel is weak or missing. Camcorder image via A/V input or DV IN to DVD Recorder is not shown on TV screen. Can’t play disc recorded on this DVD Recorder on another DVD player.
Technical Specifications General Power Supply AC 100~240V, 50/60 Hz Power Consumption 36 W Operating Temp. 5~40°C (36°~104°F) Operating Humidity 5~80% RH Dimensions (W/H/D) 420 x 66 x 268 mm Net Weight 2.8 kg Tuner Signal UHF/VHF/CATV Tuner System NTSC Connections Front Panel Video Input RCA Connector (yellow) x1...
What is Covered and How Long This warranty covers internal operating parts and service/labor to repair or replace covered parts in this GoVideo product for 90 days labor, 1 year parts, from the date of purchase, defined as follows: (1) Original Consumer Retail Purchase;...