Tv Tuner Settings; Tv Signal - GoVideo R6750 User Manual

TV Tuner Settings

TV Signal

Specifies whether the DVD Recorder is
connected to an antenna or cable TV
source.
1
Press SETUP.
2
Select TV Tuner > TV Signal
3
Choose from the following:
Antenna - Select if the DVD Recorder
is connected to an antenna.
Cable - Select if the DVD Recorder is
connected to a cable TV source.
Auto - Select to have the DVD Re-
corder automatically detect if you are
using an antenna or cable.
Auto Channel Search
Automatically searches for all available
TV stations from antenna or cable TV.
1
Press SETUP.
2
Select TV Tuner > Utilities > Start
Scan.
• The DVD Recorder searches for all
available stations.This may take
several minutes to complete.
• When finished, press SETUP to exit.
Add/Delete Channels
Allows you to manually add or remove
channels.
1
Press SETUP.
2
Select TV Tuner > Utilities > Add/De-
lete.
• If you are using a cable box or satellite receiver, you do not
need to adjust these settings.
S S
ETUP ETUP
TV Signal
System
Uilities
Language
Playback
Record
CH:15
Audio
TV Tuner
Exit
3
Add or delete channels:
• Use  to select the desired
channel.
• Press ENTER to add or delete the
channel.
• When finished, select Exit and press
ENTER.
Swap Channels
Allows you to swap the TV channel order
stored in the DVD Recorder to match the
channel order stored in your TV set.
1
Press SETUP.
2
Select TV Tuner > Utilities > Swap.
3
Select the channel to be swapped,
and press ENTER.
4
Select the new channel position, and
press ENTER.
• The channels will swap positions.
• Repeat as necessary.
• When finished, select Exit and press
ENTER.
Start Scan
Auto
Add/Delete
-----------
Swap
SETUP
ENTER
����� ����
���������� ����
3 - Setup
27