Entering A Destination - Last 10 Destinations - Blaupunkt TravelPilot Amsterdam NAV 35E Operating And Installation Manual

INTRODUCTION NAVIGATION
Note: If available, the text input line is opened first of all. Use it to
enter the required name or the first letter and then open the list.
5 Select and confirm the destination that you want.
As soon as you have selected and confirmed the special destination that you
want, you can start navigation. For further information, read the section entitled
"Navigation".
Entering a destination – Last 10 destinations
The TravelPilot automatically stores the last 10 destinations for which the system
has previously calculated a route. You can access these directly as and when
required. If the memory is full and the system calculates a new route, the oldest
route will be deleted from memory.
To access one of the last 10 destinations,
1 mark and confirm the LAST 10 menu item in the main navigation menu.
2 Select and confirm the destination that you want.
3 The system calculates the route and then starts navigation.
Note: If necessary, you will be asked to insert the navigation CD-
ROM if it is not already present in the CD drive.
RADIO CD / MP3 CD CHANGER SETUP
N1 NAVi
TMC
LAS= DES=NS
TMC
APPENDIX
36
NAV
NAV