Short Instructions - Blaupunkt ACD 9850 Operating Instructions Manual

Short instructions

1 On/Off
Turn button.
On
Off
To adjust the volume:
Turn button.
2 LD / AUD
LD - Loudness
When listening at a low level, the Loud-
ness function will create a more natural
sound by boosting the bass frequen-
cies.
To switch the Loudness on/off: Press
AUD until "LOUD ON" or "LOUD OFF"
is displayed.
Extra function:
To adjust the bass boost level.
AUD – Audio
To adjust the
BASS
TREBLE
BALANCE (left/right volume)
FADER (front/rear volume).
16
To alter a setting:
Press AUD briefly until the abbreviation
of the desired mode and the correspon-
ding value appear in the display.
Use the buttons to alter the selec-
ted setting (will be indicated in the dis-
play). The last adjustment will be stored
automatically.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous condition.
3 MIX / lo
MIX - If "MIX" lights up in the display,
the CD titles will be played at random.
To switch on/off: Press button briefly.
lo (local) - seek tuning sensitivity during
radio operation.
"lo" lights up in the display - normal
seek tuning sensitivity. The system will
only pick up powerful nearby stations.
"lo" does not light up in the display -
high seek tuning sensitivity. The system
will also pick up weaker stations.
To switch over: Press MIX/lo briefly
during radio operation.
Extra function:
To adjust the seek tuning sensitivity
separately for local and distant re-
ception.
Stereo/mono switching:
Keep button depressed until "MONO
OFF" or "MONO ON" appears in the
display.
4 CD slot
Insert the disc with the label side facing
up. The system will automatically
switch from radio to CD operation.
5
/ SRC
To eject the disc:
Hold button depressed until the disc is
ejected.
To switch between radio and CD
operation:
Press button briefly while a CD is being
played.
Extra function:
To switch the code-LED on/off.