Iomega 3151100 User Manual page 32

7 A screen may display stating you already have this driver installed. If
this screen displays, choose Replace Existing Driver and click Next.
8 Choose the port for the printer (usually this is LPT1) and click Next.
9 Use the name suggested for your printer and select Yes to designate it as
the default printer; click Next.
10 Select Yes to print a test page and click Finish.
11 To uninstall the old manufacturer's printer drivers, right mouse click on
the old printer's icon and select Delete.
12 Choose Yes.
13 Restart Windows 95.
Solution #2 (HP 820c Series ONLY) Solution #2 (HP 820c Series ONLY) Solution #2 (HP 820c Series ONLY)
Solution #2 (HP 820c Series ONLY) Solution #2 (HP 820c Series ONLY)
Change Printer Properties
1
Click the Start button and select Run.
2
Type: c:\windows\system\hpfcfg04.exe and select OK.
3
Select Continue.
4
In the available options listing, deselect the check box next to
Bidirectional Communication.
5
Select Restart Windows.
Solution #3 (HP LaserJet 5L ONLY) Solution #3 (HP LaserJet 5L ONLY)
Solution #3 (HP LaserJet 5L ONLY)
Solution #3 (HP LaserJet 5L ONLY) Solution #3 (HP LaserJet 5L ONLY)
Uninstall And Reinstall Printer Software Using the PCL
Driver
1
Shut down your system and turn off power.
2
Disconnect your printer from the Ditto drive.
3
Turn on your computer and let Windows 95 load.
4
Click the Start button, select Programs, then HP LaserJet 5L and
Uninstall.
5
With the printer disconnected, reinstall your printer software and select
Install the PCL driver alternative.
6
Do not Restart Windows.
7
Shut down your system and turn off power.
8
Reconnect printer to Ditto drive.
9
Turn on your computer and let Windows 95 start.
NOTE: Some parallel ports are set to ECP mode. If so, setting the port to
bidirectional or EPP mode may also be necessary. Refer to your computer manual
for instructions on how to set the parallel port mode.
32