Uconnect™ Voice Command (8.4 & 8.4N Only) - Dodge 2012 Journey User Manual

ELECTRONICS
• You can "barge in" while the system is talking to you, enabling you to enter your
response without waiting. Just press the Voice Command button on the steering
wheel to barge in.
Changing The Volume
• Start a dialogue by pressing the Phone button
example - "Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable
level while the Uconnect™ system is speaking. Please note the volume setting for
Uconnect™ is different than the audio system.
NOTE: To access help, press the Uconnect™ Phone
and say "help." Touch the display or push either
"cancel" to cancel the help session.
• Any voice commanded system should be used only in safe driving conditions
following local laws and phone use. All attention should be kept on the
roadway ahead. Failure to do so may result in a collision causing you and
others to be severely injured or killed.
• In an emergency, to use Uconnect™ Phone, your mobile phone must be:
• turned on,
• paired to Uconnect™ Phone,
• and have network coverage.
Uconnect™ Voice Command (8.4 & 8.4N ONLY)
• If the Uconnect™ Voice Command
then you have the Voice Command feature.
• The Voice Command feature lets you keep your hands on the steering wheel, and
your eyes on the road.
• When you press the Voice Command button
or steering wheel, you will hear a beep. The beep is your signal to give a command.
If you do not know what commands to say, you can say "help" and the system will
provide options to you. If you ever wish to interrupt the system while it lists
options, press the Voice Command button
your command.
• You can "chain" commands together for faster results. Say "Call John Doe,
mobile", for example.
56
, then say a command for
or
WARNING!
button exists on your steering wheel,
, listen for the BEEP, and say
button on the steering wheel
button and say
located on the radio faceplate