Dodge 2012 Journey User Manual page 23

Stadium Tip 'n Slide™ (Easy Entry/Exit Seat) — Seven Passenger Models
50/50 Split Third-Row Passenger Seats With Fold-Flat Feature
To Fold The Seat
• With the second-row passenger seat fully upright, pull the latch release-loop
located at the top of the seatback upward, push the seat forward slightly, and
release the release-loop. Then, continue to push the seat forward. The head
restraints will fold automatically as the seat moves forward.
To Unfold The Seat
• Grasp the assist strap loop on the seatback and pull it toward you to raise the
seatback. Continue to raise the seatback until it locks in place. Then, raise the
head restraint to lock it in place.
• To lock the seatback in a reclined position, pull the latch release-loop located at
the top of the seatback upward, allow the seatback to recline, then release the
release-loop.
GETTING STARTED
To Move The Second-Row Passenger Seat
Forward
NOTE: Raise the 20% seatback/armrest
before moving the 60% seat to allow for
full seat travel.
• To allow passengers to easily enter or
exit the third-row passenger seats move
the Tip 'n Slide™ control lever on the
upper outboard side of the seatback
forward, and in one fluid motion, the
seat cushion flips upward and the seat
moves forward on its tracks.
To Unfold And Move The Second-Row
Passenger Seat Rearward
• Move the seatback rearward until it
locks in place and then continue
sliding the seat rearward on its tracks
until it locks in place.
• Push the seat cushion downward to
lock it in place.
• Adjust the seat track position as
desired.
21