ELECTRONICS
Changing The Volume
• Start a dialogue by pressing the Phone button
"Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect®
is different than the audio system.
NOTE:
To access help, press the Uconnect® Phone
"help." Touch the display or push either
the help session.
Voice Text Reply
• Uconnect® Phone can read or send new text messages on your mobile phone.
• Your mobile phone must support Voice Text Reply over Bluetooth® in order to use this
feature. If the Uconnect® Phone determines your phone is not compatible with Voice Text
Reply messaging over Bluetooth® the "Messaging" button will be greyed out and the
feature will not be available for use.
NOTE:
• For mobile phone compatibility and pairing instructions, please visit
www.UconnectPhone.com
• Uconnect® Phone Voice Text Reply is only available when the vehicle is not moving.
Any voice commanded system should be used only in safe driving conditions follow-
•
ing applicable laws regarding phone use. Your attention should be focused on safely
operating the vehicle. Failure to do so may result in a collision causing you and others
to be severely injured or killed.
•
In an emergency, to use Uconnect® Phone, your mobile phone must be:
•
turned on,
•
paired to Uconnect® Phone,
•
and have network coverage.
Uconnect® Voice Command (8.4 & 8.4N ONLY)
• If the Uconnect® Voice Command
have the Voice Command feature.
• The Voice Command feature lets you keep your hands on the steering wheel, and your
eyes on the road.
• When you press the Voice Command button
steering wheel, you will hear a beep. The beep is your signal to give a command. If you do
not know what commands to say, you can say "help" and the system will provide options
60
, then say a command for example -
button on the steering wheel and say
or
button and say "cancel" to cancel
WARNING!
button exists on your steering wheel, then you
located on the radio faceplate or