Planet IVS-100 User Manual page 41

IVS-100 User's manual
Get Time from a NTP server:
Select "NTP" Button
Key in the NTP server's IP address.
Press "SAVE" to activate it.
After IVS-100 gets the time from NTP server, it will update IVS-100's time field.
Popup
: Setup event message while motion or sensors has been activated
When any one of alarms enabled, and one of them detected, then a message window
will be displayed on the screen.
You can have output message in case of events activated such as sensors or motion
detection to warn user.
41/79