Fast Winding; Autoreverse; Tape Selection With Mtl; Dolby B-Nr - Blaupunkt CANBERRA CM 84 Operating Instructions Manual

Fast winding

Fast forward
• Press FF (fast forward).
At the end of the tape, the set will
switch to the other track and start play-
ing it.
To stop fast forward:
• press FR.
Fast rewind
• Press FR (fast rewind).
When the tape has been completely
rewound, the set will start playing the
same track again.
To stop fast rewind:
• press FF.
Changing the track
Press simultaneously
TR1-PLAY or TR2-PLAY in the display
Fast rewind
To stop:
press FF

Autoreverse

If, while a tape is playing, you wish to switch
to the other track of that tape:
• press FR and FF simultaneously.
At the end of the tape, the set will automati-
cally switch to the other track. The display will
show TR1-PLAY for track 1 or A and TR2-
PLAY for track 2 or B.
Note:
If there is too much tension on the tape during
playback, the set may switch to the other
track by itself. In this case check the condition
of the tape. Sometimes it helps to rewind the
cassette tape completely.

Tape selection with MTL

Press the MTL button for optimal reproducti-
on when using metal or CrO
then light up on the display.
To switch the function on/off:
• Press MTL.
Fast forward
To stop:
press FR

Dolby B-NR*

With this set you can play cassettes recorded
with or without Dolby-B noise reduction.
Cassettes recorded with Dolby NR* distin-
guish by their reduced background noise and
the improved dynamic characteristics.
To switch Dolby on/off:
• press
cated on the display.
* Noise reduction system manufactured under license
from Dolby Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories.

Skipping/repeating titles

with CPS

CPS stands for Cassette Program Search.
This function allows you to skip a title or listen
to a title once again.
To switch the function on/off:
tape. "MTL" will
• press CPS.
2
When the function is on, "CPS" lights up on
the display.
. When Dolby is on, is indi-
25