Page 2
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir...
Page 4
button - unlocks the remova- ble control panel (release panel) Volume control Button - switches the unit on/off, volume mute RDS button - switches RDS fea- ture on/off (Radio Data System). Scrolling text in display. BND button (band) - selects ra- dio mode, the FM memory lev- els, and the MW and LW wave- bands.
Thank you for deciding to purchase a Blaupunkt product. We hope you enjoy using this new piece of equipment. Before using the device, please read these instructions carefully. The Blau- punkt editors are constantly working on making the operating instructions clear- er and easier to understand.
As a way of protecting your car radio against theft, the unit is equipped with a removable control panel (flip-release panel). Without this control panel, the car radio is worthless to a thief. Protect your car radio against theft by taking the control panel with you every time you leave your vehicle.
Page 8
There are various ways of switching the unit on/off. If the unit is correctly connected to the vehicle’s ignition and it was not switched off using button 3, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off.
Page 9
Your Blaupunkt dealer will be able to tell you which navigation systems can be used with your car radio. button : un-...
If a traffic announcement is received during a telephone call or whilst a nav- igation announcement is being made, the traffic announcement will only be played after the call or voice output is finished. If you are already listening to a traffic announcement and a telephone call arrives or the navigation system wish- es to make a voice output, the traffic...
Page 11
This unit is equipped with an RDS radio receiver. Many of the receivable FM sta- tions transmit a signal that not only car- ries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the dis- play as soon as it is received.
Page 12
button :. Press the The unit tunes into the next receivable station. You can also tune into stations manual- button :. Press the Note: You can only tune into stations manual- ly if the RDS function is first deactivat- If a radio station provides several pro- grammes, you have the option of brows- ing through its so-called “broadcasting network”.
Page 13
The automatic station storing procedure begins. “TRAVEL-STORE” appears in the display. After the process is com- pleted, the station stored in FMT mem- ory location 1 will be played. Select the memory or the frequen- cy range. Press the preset station button 1 - 6 >...
Page 14
Press the MENU button 8. Keep pressing the til “PTY ON” or “PTY OFF” appears in the display. button : to Press the switch PTY ON or OFF. When PTY is switched on, PTY appears in the display. Press the MENU 8 or OK button button :.
The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the treble is au- tomatically reduced thus reducing the interference level. Press the MENU button 8. Keep pressing the til “HICUT” appears in the display. button : to set Press the HICUT.
Page 16
Your radio unit is equipped with an RDS- EON receiver. EON stands for En- hanced Other Network. If you are listening to a radio station that does not broadcast traffic information but which is part of a station network that does, you will automatically be switched to a station within the network providing traffic information every time a traffic announcement (TA) is transmit-...
Page 17
You can use this unit to play standard CDs with a diameter of 12 cm. Risk of damage to CD drive! CD singles with a diameter of 8 cm and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any dam- age to the CD drive that may occur as a result of the use of unsuitable...
Page 18
To stop scanning, press the OK button ;. The current track will then continue to be played. If you want to repeat a track, press button 4 RPT >. “REPEAT TRCK” appears briefly in the display and the RPT symbol lights up. The track is repeated until you deacti- vate RPT.
Page 19
button : to Press the move from one input position to an- other. To save the name, press the MENU 8 or OK ; button. Listen to the CD whose name you wish to delete. Press the MENU button 8. button : until Press the “CD NAME”...
To switch between the track number and playing time display / track number and clock display / track number and CD number dis- play / track number and CD name display, press the 7 once or several times for longer than two seconds until the required display appears.
Page 21
>. Press button 3 “PAUSE” appears in the display. > while in Press button 3 pause mode. Playback is continued. The car radio allows you to assign names for up to 99 CDs so that you can recognise them more easily. The names can be a maximum of seven characters long.
Page 22
second confirmation beep and “DELETE ALL” appears in the dis- play. Release the MENU button 8. All CD names in the CD changer will be deleted. To return to the menu, press the OK button ;. To display the time, briefly press / DIS button 7.
Page 23
button :. Press the The time appears in the display. The minutes flash on and off and can be adjusted. Set the minutes using the buttons :. Once you have set the minutes, button :. The hours press the now flash on and off. Set the hours using the buttons :.
You can adjust the audio and volume distribution settings separately for each audio source (radio, CD, CD changer, AUX and traffic information announce- ments). Note: You can only adjust the audio and vol- ume distribution settings for traffic an- nouncements whilst a traffic announce- ment is actually being played.
If loudness is activated, the bass and treble levels are aurally compensated, i.e. they are increased at lower volume levels. Press the AUD/LD button = for approximately two seconds. LD lights up in the display when loud- ness is switched on. The loudness level can be set in steps ranging from 1 to 6.
Page 26
To switch the equalizer on, keep the DEQ button < pressed until EQ lights up and “EQ ON” briefly appears in the display. To switch the equalizer off, keep the DEQ button < pressed until EQ disappears and “EQ OFF” briefly appears in the display.
Page 27
Start by adjusting the treble and mid levels and finish by setting the bass levels. Sound Impression / problem Bass too weak Dirty bass, booming sound, unpleasant pressure Sound very much in the foreground, aggressive, no stereo effect Dull sound, low clarity, no brilliance to the instruments Measures...
Your car radio has a TMC output to which you can connect Blaupunkt navigation systems. You can find out from your Blaupunkt dealer which nav- igation systems can be used with your car radio.
If you wish to enforce a claim un- der the manufacturer guarantee that is provided by Blaupunkt, please send the faulty unit together with the purchase receipt to the Blaupunkt customer serv- ice centre in your country. You can find...