Load Default; Reboot - Planet WSD-800 User Manual

8-port 10/100mbps managed ethernet switch

Hide thumbs Also See for WSD-800:

Table of Contents

To backup the running configuration, click on the "Backup the system's parameters" link, and a pop up

window shows to save the configuration of the switch to your workstation.

To recover a saved configuration, click on the "Browse" button in the Parameters Recovery table. A pop

up window would direct you to upload the configuration file.

4.4.8 Load Default

This function is to reset the configuration of switch to the factory default. Click on the System/Load

Default menu button, and the following table shows in the web main page.

CAUTION: This operation will result in all the parameters losing.

This function is to reboot the system.

Table of Contents