Table of Contents
Advertisement
Add PC
Parameters
Client PC Description
Client PC IP Addresses
Description
The description for this client PC rule.
Enter the IP address range that you wish to apply this
Access Control rule. This is the user's IP address(es)
that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users' IP address and the last user's IP address in the
appropriate boxes. If you want to select only one user
then input the user's IP address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
41
Advertisement
Table of Contents
