Table of Contents
Advertisement
The LAN Port screen below allows you to specify a private IP address for your router 's LAN ports
as well as a subnet mask for your LAN segment.
Parameters
LAN IP
IP address
IP Subnet Mask
255.255.255.0
802.1d Spanning Tree Disabled
DHCP Server
Lease Time
Default
192.168.0.1
Enabled
Description
This is the router's LAN port IP address (Your
LAN clients default gateway IP address)
Specify a Subnet Mask for your LAN segment
If 802.1d Spanning Tree function is enabled, this
router will use the spanning tree protocol to
prevent from network loop happened in the LAN
ports.
You can enable or disable the DHCP server. By
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you'll
have to manually set your LAN client's IP
addresses; make sure the LAN Client is in the
same subnet as this broadband router if you
want the router to be your LAN client's default
gateway
The DHCP when enabled will temporarily give
your LAN clients an IP address. In the Lease
Time setting you can specify the time period that
31
Advertisement
Table of Contents
