ProForm 590 Spx Bike Manual page 9

11. Attach the Console (75) to the Console Bracket
(78) with a Console Screw (77).
12. The Transmitter (81) requires two AAA bat-
teries (not included); alkaline batteries are
recommended.
Remove the battery cover from the front of the
Transmitter (81), and insert batteries into the bat-
tery compartment. Make sure that the batteries
are oriented as shown by the diagrams inside
the battery compartment. Then, reattach the
battery cover.
IMPORTANT: From the top of the stabilizer,
measure 11 1/2 in. (29 cm) along the Frame
(1) as shown. The Transmitter (81) must be
attached in this location.
Remove the adhesive backing from the Hook
and Loop Fasteners (79). Press a Fastener onto
the Frame (1) in the indicated location.
Orient the Transmitter (81) as shown. Press
the other Fastener (79) onto the back of the
Transmitter.
Attach the Transmitter (81) to the Frame (1)
using the Hook and Loop Fasteners (79).
11
12
9
75
78
77
1
79
81
Battery
Cover
11.5”" (29 cm)
Stabilizer