Fitting The Hob Into The Worktop - AEG Electrolux 95852 G Instruction Booklet

20

Fitting the Hob into the Worktop

Carry out the building in of the hob as
follows:
1. place the seals supplied with the
hob on the front edge of the cut
out. Then, place them at 27 mm
from the side edges and at 10 mm
from the rear edge, as shown in
the diagram, taking care that the
seals meet without overlapping.
2. Place the hob in the cut out, taking
care that it is centred.
3. Fix the hob with the relevant fixing
clamps, supplied with the injectors
kit (see diagram). When the screws
have been tightened, the excess
seal can be removed.
The edge of the hob forms a double seal
which prevents the ingress of liquids.
27 27
Seal Seal Seal Seal Seal