Table of Contents
Advertisement
Fitting the hob to the worktop
Before fitting the hob into the cut out, a
sealing gasket supplied with the hob must
be fitted to the edge of the cut out. It is
essential that no gaps are left in this seal
in order to prevent spillage near the hob
seeping into the cabinet below.
1) Place the sealing gasket all
around the edge of the cut
out.
2) Place the hob into the cut out
and secure it by means of
the relevant fixing clamps
and screws, as shown in the
diagram.
3) Remove the excess seal
The edge of the hob forms a double seal which prevents the ingress of liquids.
FO0199
17
a
Seal
Advertisement
Table of Contents
