Power/Backlight/Contrast; Turn The Meridian On; Turn The Meridian Off; Using The Display Backlight - Magellan Meridian Series User Manual

Reference
Turn the Meridian On — Applies power to the Meridian and displays last
NAV screen viewed. During power-up the first screen shows the
software and map database versions currently loaded in the Meridian.
The second screen gives a warning that must be read. After reading the
warning press ENTER to proceed. (If you do not press ENTER, the
Meridian will shut off after 10 seconds.)
PWR
Turn the Meridian Off — Shuts down the Meridian.
PWR
During the 5 second countdown, pressing the PWR key again will shut
the Meridian off immediately.
Using the Display Backlight — Illuminates the display for easier viewing
in dark surroundings. Use only as needed as the backlight causes a large
drain on the batteries. An automatic timer will turn the backlight off
when a button has not been pressed
for a selected duration. (See "Setup" to
change the settings for the automaic
timer).
18
PWR
ENTER
You have 10
seconds to press
ENTER accepting
the warning or the
Meridian will shut
off.
Button Sequence
1st Press
2nd Press
3rd Press
Magellan Meridian GPS Receiver
Light On (low)
Light On (high)
Light Off