Ready To Start; Scanning; Processing; Transmitting - Seiko SII Teriostar LP-1030-MF User Manual

‹ Ready to Start
When the original is loaded, the message changes to Ready to Start.
Then press START to start scanning.
When the Start Scanning has been set to Original Setting on the system menu, with
the original loaded, the scanner automatically starts scanning.
‹ Scanning...
When the scanner starts scanning, the message changes to Scanning...
Press Cancel to stop the scanning job between the original scan start and the
image submission end.
‹ Processing...
When the scan operation is completed and when the image data processing starts
for the transmission to the computer, the message changes to Processing...
‹ Transmitting...
When the image data transmission starts, the message changes to Transmitting...
‹ Outputting...
When the image data transmission is completed and while the original is still in the
Printer, the message Outputting... appears.
LP-1030-MF User's Manual for Multifunction Printer Operation
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
93